To save the power consumption while on
standhyiEco mode
While on standby_.
Ego 7
Canceled
The display illunlination (including the display
demonstration) disappears.
EiSt:eniN_td:lh_:R_di_
To selectthe band(FM/AM)
FM
AM
To tunein to a station
While FM or AM is selected...
-q14 _ll,-
-- Increases tile frequencies.
To preset stations )
You call preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
2 Enter into the presetting mode.
3 Select a preset number fez" the station you store.
_iiiii i:iiii_iiiiiH_
sT
4 Store the station.
Decreases tile frequencies.
When a station (frequency) with sufficient signal strength is
tuned ill, tile frequency search stops.
To stop searching manually, press either button.
If the received
FM MODE
FM station is hard to listen
The MONO indicator lights on the
display. Reception will improve though
stereo effect is lostImonaural reception
mode.
To restore the stereo effect, press the
button again (the MONO indicator goes
off).
To tune in to a preset station
1 Select the band (FM oz"AM).
FM
m
2 Select a preset number fez" the station you store.
_iiiiii_::::::::tzX_
Examples:
To select preset number 5,
press 5.
To select preset nmnber 15,
press + 10, then 5.
To select preset nmnber 30,
press +10, +10, then 10.
• You can also use the PRESET +/- control on the unit.
9