JVC KD-AR7000J - External Component Operations

42
ENGLISH
2 Adjust the volume
3 Select the DSP mode and
sound mode as you want
• For details, see pages 20 to 25.
External Component Operations
For KD-AR7000:
You can connect an external component to
the LINE IN plugs on the rear.
For KD-SHX700:
You can connect an external component to
the CD changer jack on the rear using the
special adapter for the component (not
supplied). See the Installation/Connection
Manual (separate volume).
• Before operating the external component,
select the “EXT Input” setting correctly
(see page 34).
1 Select the source
For KD-AR7000:
For KD-SHX700:
• Only for KD-SHX700: If you have
changed the “EXT Input” setting to any
one other than “Line In” (see page 34), you
cannot select “LINE-IN.”
To use JVC SIRIUS Radio, refer to the SIRIUS
Radio Setup Manual (separate volume).
SOURCE
TUNER CD
CD-CH
(SIRIUS)
LINE-IN
SOURCE
TUNER CD
LINE-IN
(CD-CH/SIRIUS)
42-43_KD-AR_SHX700[J]f.p65 4/1/04, 1:40 PM42