More
Information
•
Playing
MP3/WMA
files:
- This
unit
can
play back files
with
the
extension
code <.mp3> or <.wma> (regardless
of
the
letter
case-upper/lower).
- This unit can play back the files meeting the
conditions below:
• Bit rate:
32
kbps-
320 kbps
• Sampling frequency: 8
kHz-
48
kHz
- This
unit
can
show
ID3
Tag
Version
1.0/1.1/2.2/2.3/2.4 (for
MP3).
- This unit can also show WMA Tag.
- This unit can play back files recorded in
VBR
(variable
bit
rate).
-
Files
recorded in
VBR
have a discrepancy in elapsed
time
indication.
- This unit cannot play back the following files:
•
MP3
files encoded
with
MP3i and
MP3
PRO
format.
•
MP3
files encoded
with
Layer 1/2.
• WMA files encoded
with
lossless,
professional,
and voice format.
• WMA files which
are
not
based
upon
Windows
Media®
Audio.
• WMA files copy-protected
with
DRM.
About iPod/iPhone
• Made for
- iPod touch 4th generation
- iPod touch 3rd generation
- iPod touch 2nd generation
- iPod classic
- iPod nano (6th Generation)
- iPod nano (5th Generation)
- iPod nano (4th Generation)
- iPod nano (3rd Generation)
- iPhone
6S
Plus
- iPhone
6S
- iPhone 6
Plus
- iPhone 6
- iPhone
SS
- iPhone
SC
- iPhone 5
- iPhone
4S
- iPhone 4
- iPhone
3GS
- iPhone
3G
• The song order displayed on
the
selection menu
of
this unit may differ from
that
of
the
iPod/iPhone.
• Video playback
is
not
compatible
with
this unit.
16
Maintenance
Cleaning
the
unit:
Wipe
off
dirt on the faceplate
with
a dry silicon or soft cloth.
Cleaning
the
connector:
Detach the faceplate and
clean
the
connector gently
with
a
cotton
swab,
being careful
not
to
damage the connector.
~JL
0~
Connector
(on
the
reverse
side
of
the
faceplate)
Handling
discs:
• Do
not
touch
the
recording surface
of
the disc.
• Do
not
stick tape etc. on the disc, or
use
a disc
with
tape stuck on it.
• Do
not
use
any accessories for the disc.
• Clean from
the
center
of
the disc and move
outward.
• Clean
the
disc
with
a dry silicon or soft cloth. Do
not
use
any solvents.
• When removing discs from this unit, pull
them
out
horizontally.
• Remove burrs from the center hole and disc edge
before inserting a disc.
To Next Page
Loading...
Need help?
General
