EasyManuals Logo

JVC KD-AVX2 User Manual

JVC KD-AVX2
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
60
ENGLISH
Playing an MPEG disc
This receiver can play back MPEG 1/2 files
with the extension code <.mpg>.
Audio stream should conform to MPEG1
Audio Layer 2.
Playing an DivX disc
This receiver can play back DivX files with
the extension code <.divx>, <.div>, or <.avi>
(regardless of the letter case—upper or lower).
When making a disc, use the UDF bridge
format.
This unit supports DivX 6.x, 5.x, 4.x, and 3.11.
This unit supports the DivX files whose
resolution is 720x480 pixels or less (30 fps)
and 720x576 pixels or less (25 fps).
Audio stream should conform to MP3 or
Dolby Digital.
This unit does not support GMC (Global
Motion Compression).
The file encoded in the interlaced scanning
mode may not be played back correctly.
This receiver can recognize a total 25
characters for file/folder names.
AV Menu
When the language you have selected is not
recorded on a disc, the original language is
automatically used as the initial language. In
addition, for some discs, the initial languages
settings will not work as you set due to their
internal disc programming.
After you change any of these language
settings, eject the disc and insert it (or another
disc) again so that your setting takes effect.
When you select “16:9” for a picture whose
aspect ratio is 4:3, the picture slightly changes
due to the process for converting the picture
width.
This receiver can play back the files recorded
in VBR (variable bit rate).
The files recorded in VBR have a discrepancy
in elapsed time display, and do not show
the actual elapsed time. Especially, after
performing the search function, this
difference becomes noticeable.
This receiver cannot play back the following
files:
MP3 files encoded with MP3i and MP3 PRO
format.
MP3 files encoded in an unappropriated
format.
MP3 files encoded with Layer 1/2.
WMA files encoded with lossless,
professional, and voice format.
WMA files which are not based upon
Windows Media® Audio.
WMA files copy-protected with DRM.
WMA files recorded with MBR (Multiple
Bit Rate) format.
Files which have the data such as AIFF,
ATRAC3, etc.
Playing a JPEG disc
It is recommended that you record a file
at 640 x 480 resolution. (If a file has been
recorded at a resolution of more than 640 x
480, it will take a long time to be shown.)
This System can play only baseline JPEG files.
Progressive JPEG files or lossless JPEG files
cannot be played.
Baseline JPEG format: Used for digital
cameras, web, etc.
Progressive JPEG format: Used for web.
Lossless JPEG format: An old type and rarely
used now.
If progressive or lossless JPEG files are played
back, a black screen appears. In this case, stop
playback and select a baseline JPEG file. Note
that it may take a long time to select another
file.
AVX2[E].indb 60AVX2[E].indb 60 06.1.26 2:01:45 PM06.1.26 2:01:45 PM

Table of Contents

Other manuals for JVC KD-AVX2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-AVX2 and is the answer not in the manual?

JVC KD-AVX2 Specifications

General IconGeneral
CD TextYes
Aspect ratio16:9
Display typeLCD
Display diagonal3.5 \
Audio system5.1 DTS/Dolby Digital/Dolby
FM band range87.5 - 108 MHz
LW band range144 - 279 kHz
Product colorBlack
Frequency range16 - 44000 Hz
Signal-to-Noise Ratio (SNR)95 dB
Weight and Dimensions IconWeight and Dimensions
Weight1900 g
Dimensions (WxDxH)182 x 52 x 160 mm

Related product manuals