EasyManuals Logo
Home>JVC>Car Receiver>KD-AVX44 - DVD Player With LCD monitor

JVC KD-AVX44 - DVD Player With LCD monitor User Manual

JVC KD-AVX44 - DVD Player With LCD monitor
780 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #535 background imageLoading...
Page #535 background image
SETTINGS
53
Sound
Menu items Selectable settings, [reference page]
Fader/Balance Adjust fader—speaker output balance between the front and rear speakers.
• Upmost—front only
• Downmost—rear only
When using a two-speaker system, set the fader to the center (00).
Adjust balance—speaker output balance between the left and right speakers.
• Leftmost—left only
• Rightmost—right only
Volume Adjust Adjust and store auto-adjustment volume level for each source, comparing to
the FM volume level. The volume level will automatically increase or decrease
when you change the source.
–12 to +12; Initial 00
For digital sources: You can make the adjustments separately depending on
the audio format—Dolby Digital/DTS and the others.
Subwoofer Level
*6
Adjust the subwoofer output level.
–06 to +08; Initial 00
High Pass Filter Through: Select when the subwoofer is not connected.
On: Select when the subwoofer is connected.
Crossover Adjust the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz, 120Hz, 150Hz
Amplifier Gain You can change the maximum volume level of this unit.
Off: Deactivates the built-in amplifier.
Low Power: Select this if the maximum power of the speakers is less than
50 W.
High Power
Rear Speaker
*7
You can activate/deactivate the rear speakers.
Off, On
*
1
Not selectable when “AV Input” is selected as the source.
*
2
The REVERSE GEAR SIGNAL lead connection is required “Installation/Connection Manual.” The rear view through
the camera appears on the monitor in “Full” aspect ratio (regardless of the aspect ratio setting) when you shift the
gear to the reverse (R) position.
*
3
Not selectable when the component connected to the CD changer jack is selected as the source.
*
4
The name of the component detected through the CD changer jack is shown.
*
5
The TEL MUTING lead connection is required. “Installation/Connection Manual.“
*
6
This setting takes effect only when surround is deactivated. ( also pages 22 and 23)
*
7
This setting takes effect only when Dual Zone is activated. ( also page 26)
Adjusts fader
Adjust balance
EN_KD-AVX44[A]1.indb 53EN_KD-AVX44[A]1.indb 53 08.1.25 10:15:32 AM08.1.25 10:15:32 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-AVX44 - DVD Player With LCD monitor and is the answer not in the manual?

JVC KD-AVX44 - DVD Player With LCD monitor Specifications

General IconGeneral
BrandJVC
ModelKD-AVX44 - DVD Player With LCD monitor
CategoryCar Receiver
LanguageEnglish

Related product manuals