ENGLISH
23SETTINGS
Preset value setting for each sound mode
Sound mode
Preset value
BAS (bass) TRE (treble) LOUD (loudness)
USER 00 00 OFF
ROCK +03 +01 ON
CLASSIC +01 –02 OFF
POP +04 +01 OFF
HIP HOP +02 00 ON
JAZZ +02 +03 OFF
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
BASS *
1
Adjust the bass.
–06 to +06
TREBLE *
1
Adjust the treble.
–06 to +06
FADER *
2
Adjust the front and rear speaker
output balance.
R06 to F06
BALANCE
Adjust the left and right speaker
output balance.
L06 to R06
LOUD *
1
(loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
VOL ADJ *
3
(volume adjust)
Adjust and store auto-adjustment
volume level for each source,
comparing to the FM volume level.
–05 to +05;
initial: 00
VOLUME
Adjust the volume.
00 to 50 or
00 to 30 *
4
*
1
When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently
selected sound mode (c-EQ) including “USER.”
*
2
If you are using a two-speaker system, set the fader
level to “00.”
*
3
You cannot make an adjustment for FM. “FIX”
appears.
*
4
Depending on the amplifier gain control setting. (See
page 25 for details.)
EN22-27_DV4402_001A_f.indd 23EN22-27_DV4402_001A_f.indd 23 12/12/07 11:56:04 AM12/12/07 11:56:04 AM
To Next Page
Loading...
