JVC KD-DV4401 - General Settings - PSM

ENGLISH
24
3 Select or adjust the selected PSM item.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 25.
1 Enter the PSM settings.
2 Select a PSM item.
General settings — PSM
Indications Item
( : Initial)
Setting, [reference page]
DEMO
Display
demonstration
• DEMO ON
• DEMO OFF
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [5].
: Cancels.
CLOCK DISP *
1
Clock display
• CLOCK ON
• CLOCK OFF
: The clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [5].
CLOCK HOUR
Hour adjustment
0 – 23 (1-12) [Initial: 0 (0:00)], [5].
CLOCK MIN
Minute adjustment
00 – 59 [Initial: 00 (0:00)], [5].
24H/12H
Time display mode
• 24 HOUR
• 12 HOUR
: See also page 5 for setting.
CLOCK ADJ *
2
Clock adjustment
• AUTO
• OFF
: The built-in clock is automatically adjusted using the CT (clock time)
data in the RDS signal.
: Cancels.
EN22-27_DV4402_001A_f.indd 24EN22-27_DV4402_001A_f.indd 24 12/12/07 11:56:05 AM12/12/07 11:56:05 AM