28
ENGLISH
AUDIO menu
Item Contents
DIGITAL AUDIO OUTPUT
Select the signal format to be emitted through the DIGITAL OUT
(Optical) terminal on the rear. For details, see page 49.
• PCM ONLY : Select this when connecting an amplifier or a
decoder incompatible with Dolby Digital, DTS, MPEG Audio, or
connecting to a recording device.
• DOLBY DIGITAL/PCM : Select this when connecting an
amplifier or a decoder compatible with Dolby Digital.
• STREAM/PCM : Select this when connecting an amplifier or a
decoder compatible with Dolby Digital, DTS, and MPEG Audio.
DOWN MIX
When playing back a multi-channel DVD disc, this setting affects
the signals reproduced through the LINE OUT jacks (and through
the DIGITAL OUT terminal when “PCM ONLY” is selected for
“DIGITAL AUDIO OUTPUT”).
• DOLBY SURROUND : Select this when you want to enjoy multi-
channel surround audio by connecting an amplifier compatible with
Dolby Surround to this receiver.
• STEREO : Normally select this.
D.RANGE COMPRESSION
You can enjoy a powerful sound at low or middle volume levels while
playing a Dolby Digital software.
• AUTO : Select this to apply the effect to multi-channel encoded
software (excluding 1-channel and 2-channel software).
• ON : Select this to always use this function.
EN28-33_DV6108[U_A]f.indd 28EN28-33_DV6108[U_A]f.indd 28 12/14/04 4:54:13 PM12/14/04 4:54:13 PM
To Next Page
Loading...
Need help?
General
