ENGLISH
16
When a call comes in....
The source is automatically changed to “BT-PHONE.”
When “AUTO ANS” (answer) is activated....
The unit answers the incoming calls automatically, see
page 28.
• When “AUTO ANS” (answer) is deactivated, press any
button (except /control dial) to answer the
incoming call.
To end the call
Hold any button (except /control dial).
• You can adjust the microphone volume level (see
page 28).
When an SMS comes in....
If the cellular phone is compatible with SMS (Short
Message Service) and “MSG-INFO” (message info) is set
to “AUTO” (see page 28), the unit rings and “RCV MSG”
(receiving message) appears on the display to inform
you the arrival of the message.
Using the Bluetooth cellular phone
~
Select “BT-PHONE.”
Ÿ Enter Bluetooth menu.
! Make a call or settings using the Bluetooth menu. (See pages 17 and 28.)
Change the display information
EN14-21_KD-G737_001A_pre.indd 16EN14-21_KD-G737_001A_pre.indd 16 12/14/06 2:56:55 PM12/14/06 2:56:55 PM
To Next Page
Loading...
Need help?
General
