EasyManua.ls Logo

JVC KD-R891BT

JVC KD-R891BT
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
21
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver’s
operations from the following devices.
KD-R991BT
/
KD-R891BT
: iPhone/iPod (via Bluetooth or via USB
input terminal) or Android smartphone (via
Bluetooth)
KD-R792BT
: Android smartphone (via Bluetooth)
Preparation:
Install the latest version of JVC Remote application on your device
before connecting. For more information, visit
<http://www.jvc.net/cs/car/>.
1 Press and hold .
2 Perform ‘select an item
( 3
or
4)
’ operation to select an
item. (see the following table)
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
REMOTE APP
SELECT
Select the device (IOS or ANDROID) to use the application.
IOS YES
:Selects iPhone/iPod to use the application via Bluetooth or connected via
USB input terminal.;
NO
:Cancels.
If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is
connected via USB input terminal) to activate the application.
The connectivity of the application will be interrupted or disconnected if:
You change from iPod BT source to any playback source connected via the
USB input terminal.
– You change from iPod USB source to iPod BT source.
ANDROID YES
:Selects Android smartphone to use the application via Bluetooth.;
NO
:Cancels.
ANDROID LIST
*
Selects the Android smartphone to use from the list.
STATUS
Shows the status of the selected device.
IOS CONNECTED
: You are able to use the application using the iPhone/iPod
connected via Bluetooth or USB input terminal.
IOS NOT CONNECTED
: No IOS device is connected to use the application.
ANDROID CONNECTED
: You are able to use the application using the Android
smartphone connected via Bluetooth.
ANDROID NOT CONNECTED
: No Android device is connected to use the
application.
*
Displayed only when
[ANDROID]
of
[SELECT]
is set to
[YES]
.
JS_JVC_KD_R991BT_M_EN_2.indd 21JS_JVC_KD_R991BT_M_EN_2.indd 21 7/24/2017 10:07:36 AM7/24/2017 10:07:36 AM

Related product manuals