R
Robert WeaverSep 5, 2025
Why can't my JVC KD-R810 Car Receiver select “AM”?
- TThomas AndersonSep 5, 2025
If “AM” cannot be selected on your JVC Car Receiver, check the = setting.
To Next PageTo Next PageWhy can't my JVC KD-R810 Car Receiver select “AM”?
If “AM” cannot be selected on your JVC Car Receiver, check the = setting.
What to do if the JVC Car Receiver does not detect the Bluetooth device?
If your JVC Car Receiver does not detect the Bluetooth device, search from the Bluetooth device again or reset the unit and search from the Bluetooth device again.
What to do if my JVC KD-R810 Car Receiver displays “Reset 08”?
If “Reset 08” appears on the display of your JVC Car Receiver, reconnect this unit and the HD Radio tuner box correctly, then reset the unit.
Why is the elapsed playing time not correct on my JVC KD-R810?
The elapsed playing time is sometimes not correct during playback on your JVC Car Receiver due to how the tracks are recorded on the disc (e.g., variable bit rate).
What to do if "Please Eject" appears on the display of my JVC KD-R810?
If the JVC Car Receiver's display shows "Please Eject", it might be overheating. Eject the disc or switch to a different playback source.
What causes echo or noise in my JVC KD-R810 Car Receiver?
If echo or noise occurs in your JVC Car Receiver, adjust the microphone unit’s position.
Why does my JVC Car Receiver display “No Antenna”?
If “No Antenna” appears on the display of your JVC Car Receiver, connect the antenna firmly.
What to do if the disc sound is sometimes interrupted on my JVC KD-R810 Car Receiver?
To resolve the issue of disc sound being interrupted on your JVC Car Receiver, stop playback when driving on rough roads, try a different disc, or check the cords and connections.
Why does my JVC KD-R810 Car Receiver display “No File”?
If “No File” appears on the display of your JVC Car Receiver, no tracks are stored. Import tracks to the iPod/ iPhone.
What to do if my JVC KD-R810 Car Receiver displays “Reading” keeps flashing?
If the display of your JVC Car Receiver shows “Reading” keeps flashing, consider the following: the readout time varies depending on the USB device; avoid using too many hierarchy or folders; turn the power off and then on again; avoid repeatedly pulling out or connecting the USB device while “Reading” is displayed.
General| Brand | JVC |
|---|---|
| Model | KD-R810 |
| Category | Car Receiver |
| Language | English |
Explains the icons and symbols used throughout the manual for clarity.
Covers essential functions like power, source selection, volume, and panel detachment.
Instructions for playing audio from radio, CDs, USB drives, and auxiliary inputs.
Connecting, pairing, and managing Bluetooth phone and audio devices.
Connecting and controlling iPod/iPhone playback via USB.
Adjusting sound modes, EQ, button/display colors, and dimmer.
Guide to accessing and configuring unit settings via menus.
Critical warnings for laser products, driving safety, and operating conditions.
Procedures for cleaning, disc handling, and general unit care.
Solutions for common operational problems and error messages.
Technical details on audio amplifier and tuner performance.
Technical details on CD player, USB, and Bluetooth functionalities.
