To Next PageTo Next PageHow to fix JVC KD-R810 Car Receiver when sound quality changes when receiving HD Radio stations?
If the sound quality changes when receiving HD Radio stations on your JVC Car Receiver, fix the reception mode either to or .
Why can't my JVC KD-R810 Car Receiver select “AM”?
If “AM” cannot be selected on your JVC Car Receiver, check the = setting.
What to do if my JVC KD-R810 Car Receiver displays “Reading” keeps flashing?
If the display of your JVC Car Receiver shows “Reading” keeps flashing, consider the following: the readout time varies depending on the USB device; avoid using too many hierarchy or folders; turn the power off and then on again; avoid repeatedly pulling out or connecting the USB device while “Reading” is displayed.
What to do if the disc sound is sometimes interrupted on my JVC KD-R810 Car Receiver?
To resolve the issue of disc sound being interrupted on your JVC Car Receiver, stop playback when driving on rough roads, try a different disc, or check the cords and connections.
Why does my JVC KD-R810 Car Receiver display “CHANNEL---” or “CH UNAVAIL” while listening to XM Satellite radio?
If “CHANNEL---” or “CH UNAVAIL” appears on the display for about 2 seconds, then returns to the previous channel while listening to the XM Satellite radio on your JVC Car Receiver, the selected channel is no longer available or is unauthorized. Select another channel or continue listening to the previous channel.
What causes echo or noise in my JVC KD-R810 Car Receiver?
If echo or noise occurs in your JVC Car Receiver, adjust the microphone unit’s position.
Why is the elapsed playing time not correct on my JVC KD-R810?
The elapsed playing time is sometimes not correct during playback on your JVC Car Receiver due to how the tracks are recorded on the disc (e.g., variable bit rate).
What to do if "Please Eject" appears on the display of my JVC KD-R810?
If the JVC Car Receiver's display shows "Please Eject", it might be overheating. Eject the disc or switch to a different playback source.
Why does my JVC Car Receiver display “Reset 08” when using satellite radio?
If “Reset 08” appears on the display and the satellite radio does not work at all on your JVC Car Receiver, reconnect this unit and the satellite radio correctly and reset this unit.
What to do if my JVC KD-R810 Car Receiver displays “Reset 08”?
If “Reset 08” appears on the display of your JVC Car Receiver, reconnect this unit and the HD Radio tuner box correctly, then reset the unit.
General| Brand | JVC |
|---|---|
| Model | KD-R810 |
| Category | Car Receiver |
| Language | English |
Explains the icons and symbols used throughout the manual for clarity.
Covers essential functions like power, source selection, volume, and panel detachment.
Instructions for playing audio from radio, CDs, USB drives, and auxiliary inputs.
Connecting, pairing, and managing Bluetooth phone and audio devices.
Connecting and controlling iPod/iPhone playback via USB.
Adjusting sound modes, EQ, button/display colors, and dimmer.
Guide to accessing and configuring unit settings via menus.
Critical warnings for laser products, driving safety, and operating conditions.
Procedures for cleaning, disc handling, and general unit care.
Solutions for common operational problems and error messages.
Technical details on audio amplifier and tuner performance.
Technical details on CD player, USB, and Bluetooth functionalities.
