J
Jonathan HopkinsSep 3, 2025
What to do if JVC Car Receiver says “NO SIGNAL”?
- RRebecca JonesSep 3, 2025
If the JVC Car Receiver displays “NO SIGNAL”, ensure that the antenna is mounted outside the vehicle.
To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if JVC Car Receiver says “NO SIGNAL”?
If the JVC Car Receiver displays “NO SIGNAL”, ensure that the antenna is mounted outside the vehicle.
How to fix “CHECK ANTENNA” error on JVC KD-R980BTS Car Receiver?
If the JVC Car Receiver displays “CHECK ANTENNA”, check that the antenna and its connection are in good condition.
What to do if JVC KD-R980BTS Car Receiver says “CODE ERROR”?
If the JVC Car Receiver displays “CODE ERROR”, verify that you have entered the correct pass code.
What to do if JVC Car Receiver detects no Bluetooth device?
To resolve the issue of no Bluetooth device being detected by your JVC Car Receiver, search from the Bluetooth device again or reset the unit.
How to fix no sound during playback on JVC KD-R980BTS?
If you cannot hear sound during playback on your JVC Car Receiver, try the following: * Reconnect the Android device. * If in [AUDIO MODE], launch any media player application on the Android device and start playback. * If in [AUDIO MODE], relaunch the current media player application or use another media player application. * Restart the Android device. If the problem persists, the connected Android device may not be able to route the audio signal to the unit.
How to fix pairing issues on JVC KD-R980BTS?
If you are unable to make a pairing with your JVC Car Receiver, verify that you have entered the same PIN code on both the unit and the Bluetooth device. If the problem continues, delete the pairing information from both the unit and the Bluetooth device, and then try pairing again.
Why is playback intermittent on my JVC Car Receiver?
If you're experiencing intermittent playback or sound skipping with your JVC Car Receiver, try turning off the power saving mode on your Android device.
What to do if JVC Car Receiver says “BT DEVICE NOT FOUND”?
If your JVC Car Receiver displays “BT DEVICE NOT FOUND”, turn on Bluetooth from your device and connect manually.
General| Brand | JVC |
|---|---|
| Model | KD-R980BTS |
| Category | Car Receiver |
| DIN Size | Single DIN |
| RMS Power Bandwidth | 20 Hz - 20 kHz |
| Bluetooth | Yes |
| USB Port | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| Radio Tuner | AM/FM |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Preamp Voltage | 4 Volts |
| Display Type | LCD |
| SIRI Compatibility | Yes |
| Android Compatibility | Yes |
| Pandora Control | Yes |
| Spotify Control | Yes |
| iHeartRadio Control | Yes |
| HD Radio | No |
| Remote Control | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| EQ Settings | 13-Band Graphic EQ |
| Faceplate Security | Detachable |
| RMS Power Output | 22W x 4 |
| Peak Output | 50 watts x 4 channels |
| Compatible Formats | MP3, WMA, WAV |
| Power Output | 50W x 4 |
| Display | Variable Color |
Important safety warnings and adherence to FCC regulations for RF energy.
Guide to connecting and playing audio from various media sources.
Steps for setting up and enjoying Pandora internet radio via the unit.
Instructions for pairing and establishing Bluetooth connections with devices.
Lists common issues and their corresponding solutions for unit operation.
Step-by-step instructions for physically installing the unit and connecting its wiring.
