16
ENGLISH
Recalling the sound modes
1
Select the source while the “Link” indicator
is lit on the display.
The “Link” indicator starts flashing, and the sound mode
stored in memory for the selected source is recalled.
Notes:
• You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments”
on page 18.
• To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily,
see page 13 and 14. (Your adjustments will be cancelled if another source is selected.)
1
Equalization pattern of the
selected sound mode appears
C D
A M
F M
EN13-18.KD-S550[E] 00.1.19, 5:05 PM16
To Next Page
Loading...
