JVC KD-T706BT User Manual

14
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
or the following button.
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
Reject a call
Press and hold
or the following button.
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
End a call
Press and hold
or the following button.
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press
or the following button.
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
Reject another incoming
call
Press and hold
or the following button.
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
While having two active calls...
End current call and
activate held call
Press and hold
or the following button.
KD-T801BT/KD-T709BT: * ENTER
KD-T706BT/KD-T702BT: Volume knob
Swap between the
current call and held call
Press
.
Adjust the phone volume*1
[00] to [35] (Default: [15] )
Perform the following operation during a call.
KD-T801BT/KD-T709BT: Press VOL +/– *2
KD-T706BT/KD-T702BT: Turn the volume knob
Switch between hands-free
and private talk modes*3
Press
during a call.
*1 This adjustment will not affect the volume of the other sources.
*2 Press and hold VOL + to continuously increase the volume to 15.
*3 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1 Press and hold .
2 Perform ‘Select an item (page3 or 4)’ operation to select an
item (see the following table).
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[MIC GAIN] [LEVEL –10] to [LEVEL +10] ([LEVEL –04]): The sensitivity of the
microphone increases as the number increases.
[NR LEVEL]
[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the noise reduction
level until the least noise is being heard during a phone conversation.
[ECHO CANCEL]
[LEVEL –05] to [LEVEL +05] ([LEVEL 00]): Adjust the echo cancellation
delay time until the least echo is being heard during a phone conversation.
BLUETOOTH®
JS_JVC_KD_T801BT_E_EN_05.indd 14JS_JVC_KD_T801BT_E_EN_05.indd 14 6/4/2018 9:41:21 AM6/4/2018 9:41:21 AM

JVC KD-T706BT Specifications

General

Brand	JVC
Model	KD-T706BT
Category	Car Receiver
Language	English