18
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH — Audio
For key layout on the faceplate, see page 3 or page 4.
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Audio player via Bluetooth
1
Press source button repeatedly to select BTAUDIO.
• Pressing enters BT AUDIO directly.
2 Operate the Bluetooth audio player to start playback.
To On the faceplate
Play back/pause
KD-T801BT/KD-T709BT: Press * ENTER
KD-T706BT/KD-T702BT: Press the volume knob.
Select group or folder
Press 2 J / 1 K.
Reverse skip/Forward skip
Press S / T.
Reverse/Fast-forward
Press and hold S / T.
Repeat play
Press 4 repeatedly.
[TRACKREPEAT], [ALLREPEAT], [REPEATOFF]
Random play
Press 3 repeatedly.
[GROUPRANDOM], [ALLRANDOM], [RANDOMOFF]
Select a file from a folder/
list
Refer to “Select a file from a folder/list” on
page 10.
Switch between
connected Bluetooth
audio devices
Press 5.*
* Pressing the “Play” key on the connected device itself also causes switching of sound output
from the device.
BLUETOOTH®
Operations and display indications may differ according to their availability
on the connected device.
Settings to use JVC Remote application
JVC Remote application is designed to control the JVC car receiver’s
operations from the following devices.
KD-T801BT: iPhone/iPod (via Bluetooth or via USB
input terminal) or Android smartphone
(via Bluetooth)
KD-T709BT/KD-T706BT/KD-T702BT: Android smartphone (via Bluetooth)
Preparation:
• Install the latest version of JVC Remote application on your device before
connecting.
• For more information, visit <http://www.jvc.net/cs/car/>.
1 Press and hold .
2 Perform ‘Select an item (page3 or 4)’ operation to select an
item. (Page19)
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
JS_JVC_KD_T801BT_E_EN_05.indd 18JS_JVC_KD_T801BT_E_EN_05.indd 18 6/4/2018 9:41:25 AM6/4/2018 9:41:25 AM
To Next Page
Loading...
Need help?
General
