JVC KD-X320BT - Audio Settings; Equalizer Presets and Customization; Sound Tone Adjustments

ENGLISH
17
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
AUDIO SETTINGS
Default: XX
EQSETTING
EQPRESET
FLAT / HARD ROCK / JAZZ / POP / R&B / TALK / USER1 / USER2 /
VOCALBOOST / BASSBOOST / CLASSICAL / DANCE :Selects a preset
equalizer.
EASYEQ 1 USER1 / USER2 :Select a preset name.
2 Adjust your own sound settings.
SUB.W SP
*
1
*
2
: 00 to +06 (Default: 03
SUB.W
*
1
*
3
: –08 to +08 00
BASS  LVL : –06 to +06 00
MID  LVL: –06 to +06 00
TRE  LVL : –06 to +06 00 )
PRO EQ 1 USER1 / USER2 :Select a preset name.
2 BASS / MIDDLE / TREBLE :Select a sound tone.
3 Adjust the sound elements of the selected sound tone.
BASS Frequency: 60 / 80 / 100 / 200HZ
(
Default: 80HZ
Level: –06 to +06 00
Q: Q1.0 / Q1.25 / Q1.5 / Q2.0 Q1.0 )
MIDDLE Frequency: 0.5 / 1.0 / 1.5 / 2.5KHZ (Default: 1.0KHZ
Level: –06 to +06 00
Q: Q0.75 / Q1.0 / Q1.25 Q1.25 )
TREBLE Frequency: 10.0 / 12.5 / 15.0 / 17.5KHZ (Default: 10.0KHZ
Level: –06 to +06 00
Q: QFIX QFIX )
*
1
Displayed only when [ SUB.W ] is set to [ ON ]. (  18 )
*
2
Displayed only when [ SPK/PRE  OUT ] is set to [ SUB.W/SUB.W ]. (  18 )
*
3
Displayed only when [ SPK/PRE  OUT ] is set to [ REAR/SUB.W ] or [ SUB.W/SUB.W ]. (  18 )
To
On the faceplate
Select a preset
equalizer
Press repeatedly.
Press
, then turn the volume knob
within 2seconds.
Preset equalizer : FLAT (default), HARD ROCK , JAZZ , POP ,
R&B , TALK , USER1 , USER2 , VOCAL BOOST , BASS BOOST ,
CLASSICAL , DANCE
Store your own
sound settings
1 Press and hold .
2 Turn the volume knob to select [ EASY EQ ], then
press the knob.
3 Turn the volume knob to select [ USER1 ] or
[
USER2 ], then press the knob.
4 Turn the volume knob to make a selection,
then press the knob.
For settings, refer to step
2 of [ EASYEQ ].
• To return to the previous setting item, press
.
• To exit, press
.
Other settings
1
Press and hold .
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
JS_JVC_KD_X320BT_U_EN_00_2.indd 17JS_JVC_KD_X320BT_U_EN_00_2.indd 17 11/9/2014 4:52:52 PM11/9/2014 4:52:52 PM