EasyManua.ls Logo

JVC KD-X482BT - Radio; Search for a station; Settings in memory; Store a station

JVC KD-X482BT
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
7
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Radio
The unit switches to FM alarm automatically when receiving an alarm signal
from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select FM, AM, SW1 or SW2.
2 Press S / T (or press H / I on the remote control) to search for a
station automatically.
(or)
Press and hold S / T (or press and hold H / I on the remote
control) until “M” flashes, then press repeatedly to search for a station
manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
“MEMORY” appears once the station is stored.
Select a stored station
Press one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
Other settings
1
Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[TUNER SETTING]
[RADIO TIMER]
(For KD-X482BT)
Turns on the radio at a specific time regardless of the current source.
1
[ONCE]/[DAILY]/[WEEKLY]/[OFF]: Select how often the timer will be
turned on.
2
[FM]/[AM]/[SW1]/[SW2]: Select the source.
3
[01] to [18] (for FM)/[01] to [06] (for AM/SW1/SW2): Select the preset
station.
4
Set the activation day*1 and time.
” indicator lights up when complete.
Radio Timer will not activate for the following cases.
The unit is turned off.
[OFF] is selected for [AM SRC]/[SW1 SRC]/[SW2 SRC] in
[SOURCESELECT] after Radio Timer for AM/SW1/SW2 is selected.
(Page 6)
*1: (see page 8)
KD-X482BT_M_B5A-3846-00_EN_1st Draft.indd 7KD-X482BT_M_B5A-3846-00_EN_1st Draft.indd 7 21/9/2021 12:44:57 AM21/9/2021 12:44:57 AM

Related product manuals