D
David LiSep 15, 2025
Why is playback intermittent or skipping on my JVC Receiver?
- WWendy AustinSep 15, 2025
If playback is intermittent or the sound skips, turn off the power saving mode on the Android device.
To Next PageTo Next PageWhy is playback intermittent or skipping on my JVC Receiver?
If playback is intermittent or the sound skips, turn off the power saving mode on the Android device.
What does 'MISWIRING CHECK WIRING THEN PWR ON' mean on my JVC KD-X441DBT?
This message indicates a wiring issue. Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. After checking the wiring, turn the power back on.
What to do if my iPod/iPhone does not turn on or work with my JVC KD-X441DBT Receiver?
First, check the connection between the receiver and your iPod/iPhone. If the issue persists, detach and reset the iPod/iPhone using a hard reset.
What does 'CHK ANTENNA' mean on my JVC KD-X441DBT Receiver?
This message means there may be an issue with the DAB antenna. Check the DAB antenna. If you are using a passive antenna (without a booster), set [DAB ANT POWER] to [OFF].
Why does 'CANNOT PLAY' appear when playing from Android device on my JVC KD-X441DBT?
If "CANNOT PLAY" appears when playing from an Android device, ensure the Android device contains playable audio files. You might also try reconnecting or restarting the Android device.
Why are correct characters not displayed on my JVC KD-X441DBT Receiver?
This unit can only display uppercase letters, numbers, and a limited number of symbols. Depending on the display language you have selected, some characters may not be displayed correctly.
Why is the playback order not as intended on my JVC KD-X441DBT?
The playback order is determined by the file name.
Why is the elapsed playing time incorrect on my JVC KD-X441DBT Receiver?
The accuracy of elapsed playing time depends on the recording process.
How to fix poor phone sound quality on my JVC KD-X441DBT?
If the phone sound quality is poor, try reducing the distance between the unit and the Bluetooth device. You might also try moving the car to a location with better signal reception.
Why is the connected Bluetooth audio player not controlled by my JVC KD-X441DBT?
If you cannot control the connected Bluetooth audio player, verify that the player supports Audio/Video Remote Control Profile (AVRCP). Also, try disconnecting and reconnecting the Bluetooth player.
Key information on safe usage, warnings, cautions, and manual care.
Instructions for turning power on/off, adjusting volume, selecting sources, and changing display information.
Guide to setting key beep, source selection, firmware updates, and factory reset.
Steps for connecting the DAB antenna, selecting DAB, and updating the service list.
Instructions for connecting compatible mobile devices via USB.
How to play, pause, repeat, and randomize tracks from USB sources.
Choosing control mode for iPod (Head/iPhone) and Android (Auto/Audio).
Steps to pair a Bluetooth device for the first time, including passkey confirmation.
Procedures for answering, rejecting, and ending incoming and ongoing calls.
Handling multiple active calls, swapping, and adjusting phone volume during calls.
How to make calls from recent call history, phonebook, dial number, or voice commands.
How to select and connect to Bluetooth audio devices for music playback.
Sets speaker delay times for optimal sound environment based on vehicle and listening position.
Solutions for sound issues, wiring errors, protection modes, and general system problems.
Addressing problems with DAB reception, analog radio connectivity, and static noise.
Resolving issues with unsupported devices, loading errors, and playback problems.
Addressing pairing failures, sound interruption, and echo/noise issues.
Crucial safety warnings and basic steps for installing the unit in a vehicle.
General
