EasyManuals Logo
Home>JVC>Receiver>KD-X441DBT

JVC KD-X441DBT User Manual

JVC KD-X441DBT
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
ENGLISH
26
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard.
Adjust the volume to the optimum level.
Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the
[SOURCE SELECT]
setting.
( 4)
Digital Radio
DAB reception is poor.
Make sure
[ON]
is selected for
[DAB ANT POWER]
.
( 7)
“CHK ANTENNA”
Check the DAB antenna. If a passive antenna (without
a booster) is used, set
[DAB ANT POWER]
to
[OFF]
.
( 7)
“RELATED SERV FOUND”
Press the volume knob to activate Soft-Link.
( 7)
Press to cancel.
Analog
Radio
Radio reception is poor.
Static noise while
listening to the radio.
Connect the antenna firmly.
USB/iPod
Playback order is not as
intended.
The playback order is determined by the file name
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears
and file skips.
Check whether the file is a playable format.
( 24, 25)
“READING” keeps flashing.
Do not use too many hierarchical levels and folders.
Reattach the USB device.
Symptom Remedy
USB/iPod
“UNSUPPORTED DEVICE”
appears.
Check whether the connected device is compatible with
this unit and ensure the file systems are in supported
formats.
( 24
,
25)
Reattach the device.
“UNRESPONSIVE DEVICE”
appears.
Make sure the device is not malfunction and reattach the
device.
“USB HUB IS NOT
SUPPORTED” appears.
This unit cannot support a USB device connected via a
USB hub.
“CANNOT PLAY” appears
Connect a USB device that contains playable audio files.
The iPod/iPhone does not
turn on or does not work
Check the connection between this unit and iPod/
iPhone.
Detach and reset the iPod/iPhone using hard reset.
“LOADING” appears when
you enter search mode by
pressing
.
This unit is still preparing the iPod/iPhone music list. It
may take some time to load, try again later.
Correct characters are not
displayed.
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
Depending on the display language you have selected
( 5)
, some characters may not be displayed correctly.
ANDROID
Sound cannot be heard
during playback.
Sound output only from
the Android device.
Reconnect the Android device.
If in [
AUDIO MODE
], launch any media player
application on the Android device and start playback.
If in [
AUDIO MODE
], relaunch the current media player
application or use another media player application.
Restart the Android device.
If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit.
( 25)
JS_JVC_KD-X441DBT_E_EN_3.indd 26JS_JVC_KD-X441DBT_E_EN_3.indd 26 11/24/2016 4:19:03 PM11/24/2016 4:19:03 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X441DBT and is the answer not in the manual?

JVC KD-X441DBT Specifications

General IconGeneral
BrandJVC
ModelKD-X441DBT
CategoryReceiver
LanguageEnglish

Related product manuals