JVC KW-V30BT - Rear View Camera Setup

ENGLISH 33
OTHER EXTERNAL COMPONENTS
Using a rear view camera
• To connect a rear view camera, see page 57 .
• To use a rear view camera, a REVERSE GEAR
SIGNAL lead connection is required. (Page55 )
R Activating the rear view camera
1 Display the <Input> setting screen.
On the Home screen:
2
To deactivate: Select [Off] for <Camera Input>.
R Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
For KW-V50BT Region 1/KW-V30BT Region 1: To
erase the caution message, touch the screen.
To display the picture from the rear view camera
manually
On the Home screen:
Adjusting the picture from the rear view camera
When displaying the picture from the rear view
camera manually, you can change the setting of the
picture.
1 Display the <Video Menu> screen.
KW-V50BT KW-V30BT
2
[ ]
Selects the aspect ratio. (Page46)
[
]
Displays the picture adjustment
screen. (Page45)
To exit the rear view screen
KW-V50BT KW-V30BT