EasyManua.ls Logo

JVC KW-XG706H

JVC KW-XG706H
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
33REFERENCES
Symptom Remedy/Cause
Discs in general
Disc can neither be played back nor ejected. Unlock the disc (see page 10).
Eject the disc forcibly (see page 3).
Disc sound is sometimes interrupted. Stop playback while driving on rough roads.
Change the disc.
Check the cords and connections.
“NO DISC” appears on the display. Insert a playable disc into the loading slot.
MP3/WMA
Disc cannot be played back. Use a disc with MP3/WMA tracks recorded in the format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
Add the extension code <.mp3> or <.wma> to the file
names.
Noise is generated. Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3/WMA
tracks.)
A longer readout time is required (“CHECK”
keeps flashing on the display).
Do not use too many hierarchies and folders.
Tracks do not play back in the order you have
intended them to play.
Playback order is determined when files are recorded.
Elapsed playing time is not correct. This sometimes occurs during play. This is caused by how
the tracks are recorded on the disc.
“PLEASE” and “EJECT” appear alternately on
the display.
Insert a disc that contains MP3/WMA tracks.
Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
USB device
Noise is generated. The track played back is not an MP3/WMA/WAV track.
Skip to another file. (Do not add the extension code
<.mp3>, <.wma>, or <.wav> to non-MP3/WMA/WAV
tracks.)
“CHECK” keeps flashing on the display. Readout time varies depending on the USB device.
Do not use too many hierarchy, folders, and empty
folders*.
Turn off the power then on again.
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA/WAV track.
“NO FILE” flashes on the display.
“NO USB” appears on the display.
Attach a USB device that contains tracks encoded in an
appropriate format.
Continued on the next page
EN28-37_KW-XG706_001A_f.indd 33EN28-37_KW-XG706_001A_f.indd 33 16/4/08 10:48:23 AM16/4/08 10:48:23 AM

Related product manuals