16
3
Initial Setup
15. Your TV will now start the automatic channel scan.
10. Press the buttons to highlight Home Mode then
press OK.
To access all the features of your Smart TV you must be connected to the internet.
If you do not wish to set up your network connection you can skip this section by
pressing
, however we recommend you set up your network connection now.
WIRED Connection
• If you have connected your ethernet cable to the LAN socket on the back of
your TV press the
buttons to select WIRED DEVICE. When Network says
ENABLED press the OK button.
WIRELESS Connection
You can connect using a wireless connection via your router.
11. Press the
buttons to select WIRELESS DEVICE. Wait a few seconds and a
list of all wireless networks will be displayed.
12. Press the
buttons to select your wireless network then press OK.
13. You now need to enter your password, a keyboard will appear. Press the
buttons to select a letter/number/symbol and press OK to enter each
one. Once you have typed your password highlight OK and press OK. The
network will now show Connected.
14. Press the OK button to continue.
To Next Page
Loading...
Need help?
General
