JVC LT-37X688 Service Manual

(No.YA535)1-33
5.1.8 METHOD OF DISPLAY WHEN A RASTER IS NOT OUTPUT
In the state where a raster is not output by breakdown of the set, an error is displayed by blink of the POWER LED.
< Explanation of operation >
If error is detected, the power is turned off.
Shortly after a power is turned off, POWER LED will be blinked.
Power cannot be turned on until the power cord takes out and inserts, after a power is turned off.
Type of error POWER LED flash cycle
Low bias line short protection LED turnig on and off at 1 second intervals.

JVC LT-37X688 Specifications

General

Integrated clock	Yes
Comb filter	Digital
Display diagonal	37 \
Display brightness	500 cd/m²
Native aspect ratio	16:9
Viewing angle, horizontal	176 °
Analog signal format system	NTSC
HDCP	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video outputs quantity	1
Product color	Black
RMS rated power	20 W

Weight and Dimensions

Depth (without stand)	232 mm
Width (without stand)	927.1 mm
Height (without stand)	654.05 mm
Weight (without stand)	18280 g