– 26 –
English
Specifications
Amplifier section — CA-MXK50
Output Power:
100 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no
more than 10% total harmonic distortion.
Audio input sensitivity/Impedance (at 1 kHz)
AUX: 400 mV/50 kΩ
MIC: 5 mV/5 kΩ
Speakers/Impedance: 6 Ω – 16 Ω
Tuner
FM tuning range: 87.50 MHz – 108.00 MHz
AM tuning range: 531 kHz – 1 602 kHz
(at 9 kHz intervals)
530 kHz – 1 710 kHz
(at 10 kHz intervals)
CD player
CD Capacity: 3 CDs
Dynamic range: 85 dB
Signal-to-noise ratio: 85 dB
Cassette deck
Frequency response
Normal (type I): 50 Hz — 14 000 Hz
Wow and flutter: 0.15% (WRMS)
General
Power requirement: AC 110 V / AC 127 V / AC 220 V /
AC 230 V — AC 240 V
, adjustable
with the voltage selector, 50 Hz / 60 Hz
Power consumption: 120 W (at operation)
17 W (on standby)
Dimensions (approx.): 270 mm x 317 mm x 449 mm (W/H/D)
Mass (approx.): 8.8 kg
Supplied accessories
See page 6.
Speaker section — SP-MXK50
Type: 3-way bass-reflex type
Speaker units: Woofer: 13.5 cm cone x1
Midrange: 5 cm cone x1
Tweeter: 2 cm dome x1
Power handling capacity: 100 W
Impedance: 6 Ω
Frequency range: 32 Hz — 20 000 Hz
Sound pressure level: 81 dB/W•m
Dimensions (approx.): 228 mm x 318 mm x 255 mm (W/H/D)
Mass (approx.): 3.5 kg each
Design and specifications are subject to change without notice.
EN18-26.MX-K50[U].pm6 02.5.21, 11:21 AM26
To Next Page
Loading...
