JVC UX-A52R - Page 23

1-23
UX-A52R
Prior to performing the following procedure, remove
the side bracket (L) and (R).
Remove the slit washer attaching the cassette
hanger assembly and pull out the pin.
Move the cassette hanger assembly in the direction
of the arrow to release the boss of the joint c on the
left rear side and detach the cassette hanger
assembly upward.
1.
2.
Removing the cassette hanger assembly
/ cassette holder (See Fig.5)
The cassette hanger assembly is
detached with the cassette holder.
REFERENCE:
Prior to performing the following procedure, remove
the side bracket (L), (R), cassette hanger assembly /
cassette holder.
Release the tab d in the direction of the arrow and
pull out the pinch roller upward.
1.
Removing the pinch roller (F) and (R)
(See Fig.6 to 8)
The above method is for removing the
pinch roller (F) and (R).
REFERENCE:
Fig.5
Fig.6
Fig.8Fig.7
E-washer
Cassette hanger assembly
Cassette holder
Pin
Pinch roller (F)
Pinch roller (R)
Pinch roller (F)
Pinch roller (R)
Tab d
Tab d