JVC UX-S57

19
DISC
SELECT
CD
132
465
798
10 +10
DISC UP
DISC DOWN
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you
to start playing the track number on the
current disc.
Ex.: For track number 5, press 5.
For track number 15, press +10, then
5.
For track number 20, press +10, then
10.
For track number 30, press +10, +10, then 10.
To select a group or track before playback (MP3 discs
ONLY)
When the current disc is an MP3 disc, you can start playback
from the favorite group/track.
1. When “G01” is flashing, press ¢ or 4 (or, ¢ UP
or 4 DOWN on the unit) repeatedly to select a
group.
•To flash “G01,” press 7 when “T001” is flashing, or
press 7 twice when the disc is played back.
2. Press 3/8 CD to flash “T001,” then press ¢ or 4
(or, ¢ UP or 4 DOWN on the unit) repeatedly to
select a track.
•When you select a group again, press 7.
3. Press 3/8 CD to start playback.
During playback of an MP3 track
You can show the following items alternately by pressing DISPLAY:
• the file name of the current track and the ID3 tag information
• the elapsed playing time
Playing Back Discs on the 5-CD Changer (continued)
Basic Disc Operations
To exchange a disc during playback of another disc
On the unit ONLY:
Press the disc eject buttons (CD10 – CD50) to eject a disc
not currently playing.
If discs are exchanged during playback, playback will stop
after playing all newly inserted discs.
To start playing a disc during playback of another disc
On the remote control:
Press DISC UP or DISC DOWN.
Each time you press the button, the next or
previous disc is selected and playback starts.
On the unit:
Press DISC SELECT repeatedly.
Each time you press the button, the next disc is
selected and playback starts.
To locate a particular point in a track during play
On the remote control:
Press and hold ¢ or 4.
On the unit:
Press and hold ¢ UP or
4 DOWN.
• ¢ (¢ UP): Fast-forwards the tracks.
• 4 (4 DOWN): Fast-reverses the tracks.
To go to another track
On the remote control:
Press ¢ or 4 repeatedly.
On the unit:
Press ¢ UP or 4 DOWN
repeatedly.
• ¢ (¢ UP): Skips to the beginning of the next or
succeeding tracks.
•You can skip to tracks on the next
disc.
• 4 (4 DOWN): Goes back to the beginning of the
current or previous tracks.
•You cannot skip back to tracks on
the previous disc.
CD1 CD2 CD3 CD4 CD5
CD
1
2
3
4
5
CD
1
2
3
4
5
Group name
File name
17_21_UX_S57[B]f.p65 04.3.10, 7:10 PM19