(No.MB487)1-17
3.1.10 Removing the FL switch board
(See Figs.18 and 19)
• Remove the metal cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the six
screws Q attaching the FL switch board. (See Fig.18.)
(2) Take out the FL switch board from the front panel assembly
while lifting it little by little. (See Fig.18.)
Reference:
The volume knob assembly and select knob assembly are re-
moved from the front side simultaneously. (See Fig.19.)
Fig.18
Fig.19
FL switch board
Front panel assembly
Q
Q
Volume knob assembly
Select knob assembly
To Next Page
Loading...
