LISTENING TO PROGRAMMED TRACKS
Enter a program as described above
Press the Play/ Pause button. The track number and playing time will be displayed.
Disc play will start at the beginning of the first programmed track.
When all of the programmed tracks have finished playing, the CD player will enter the stop
mode.
TO CLEAR THE PROGRAM MEMORY
If the disc is playing, press the Stop button to clear the memory
Note: The program memory will also be cleared if the disc compartment is
opened, or if the power is switched off.
CASSETTE TAPE PLAYBACK
l Press the Power / Stand-by button to turn the unit on.
l Place the FUNCTION selector switch in the position marked TAPE.
l Press the Stop/Eject key to open the Cassette Door.
l Insert your cassette tape with the exposed section at the bottom and the playback
side facing you.
l Close the Cassette Door securely.
l Press the Play key to activate playback.
l Use the Pause key whenever you want to suspend playback.
l Press the Stop/Eject key when finished.
RECORDING
RECORDING FROM THE RADIO
l Select the TUNER function by pressing the TUNER Button.
l Tune in your station and put in your cassette tape.
l Press the Record Key and the Play Key at the same time to start recording.
l Press the Stop/Eject key when finished.
RECORDING FROM CD
l Select the CD function by pressing the CD Button.
l Press the Record Key and the Play Key at the same time.
l Press the CD Play/Pause button.
l To stop recording, press the Stop button of the CD player. Then press the Stop/Eject
key of the cassette deck.
7
004AV1R.p65 2004/2/10, PM 04:077
To Next Page
Loading...
Need help?
General
