Do you have a question about the JXCT JXBS-3001-TR-RS and is the answer not in the manual?
Measuring Range (Moisture) | 0-100%RH |
---|---|
Measuring Range (Temperature) | -40°C to 80°C |
Output Signal | RS485 |
Accuracy (Temperature) | ±0.5°C |
Operating Temperature | -40°C to 80°C |
Operating Humidity | 0-100% RH |
Protection Level | IP65 |
Cable Length | 2m |
Accuracy (Moisture) | ±3% RH |
Type | Soil Temperature and Moisture Sensor |
Overview of the soil moisture temperature sensor, its high accuracy, fast response, and suitability for various soil conditions.
Details technical specifications including power supply, communication protocol, temperature range, accuracy, and protection level.
Illustrates system configurations for single-ended and multiple-ended sensor connections to PLC, MCU, and PC.
Check the list of devices provided before proceeding with installation. Includes sensor, power adapter, warranty card, and USB to 485 device.
Description of the sensor's physical interface components, including waterproof head, epoxy resin glue, and stainless steel probe.
Guidance on selecting a measurement site and inserting the sensor vertically into the soil for accurate readings.
Instructions for burying the sensor horizontally in a pit for long-term, stable measurements.
Essential precautions for sensor installation and operation, including needle insertion, avoiding sunlight, and water immersion.
How to connect the sensor transmitter to a PC using an RS485 to USB adapter and identify the COM port.
Guide on operating the Sensor Management software, connecting devices, and configuring communication settings like Baud and Address.
Details Modbus RTU protocol parameters: data bits, parity, stop bit, error checking, and baud rate settings.
Lists register addresses for accessing soil humidity, temperature, device address, and baud rate for read/write operations.
Provides examples of inquiry and answer frames for reading soil temperature and humidity values using Modbus RTU.