K-9 K9-5 Classic User Manual

COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT, INC. 2000
MODEL: K9-5 Classic
Page - 36
Programming Transmitters
Each system includes two pre-programmed transmitters. To program transmitters, such
as when adding a transmitter or changing the button assignment, follow this process:
Step 1- Turn "on" the ignition.
Step 2- Within 5 seconds of turning "on" the ignition, press the Valet Switch 5 times. The
siren will chirp, confirming that for the next 10 seconds the system is ready to learn
a transmitter code. When the first transmitter code is learned all existing stored
codes will be erased. To enter a transmitter code, simply press and release the
transmitter button which is desired to arm and disarm the system*.
Step 3- Repeat this procedure for each transmitter desired to operate the security system.
The system will chirp the siren once to confirm that each transmitter code was
learned. Both of the other two transmitter button's functions will automatically be
learned when the arm / disarm button is learned. If a code is not received within
a 10 second period, the learning process will automatically terminate.
* Other button operations may be used, as shown in this chart:
Arm / Disarm Trunk Release 3rd Channel
Large Center Button Small Right Button Small Left Button
Small Right Button Large Center Button Small Left Button
Small Left Button Large Center Button Small Right Button
Feature #22 configures arm and disarm to separate buttons; please see the Owner's Manual.
MI_K9-5CLASSIC_REV1
INSTALLATION MANUAL

K-9 K9-5 Classic Specifications

General

Engine Immobilizer	Yes
Keyless Entry	Yes
Panic Mode	Yes
Valet Mode	Yes
Starter Kill	Yes
Door Trigger	Yes
Hood Trigger	Yes
Trunk Trigger	Yes
Remote Control Range	1, 500 feet
Shock Sensor	Yes

Summary

Installation Considerations

Constant Power

Red Wire

Details the function of the red wire in supplying constant positive 12 volts to the system.

Ignition Power

Yellow Wire

Describes the yellow wire's role as an ignition 'on' input for system operation.

Starter Interrupt Output

Orange Wire

Explains the orange wire's function for an optional starter disable socket and relay.

5 Wire Reversal Rest At Ground Systems

2nd Channel / Trunk Release Output

Positive Siren Output

3 Wire Negative Pulse Systems

Positive Flashing Parking Light Output

Details the white wire's function for flashing parking lights for confirmation and deterrence.

White Wire

Power Doorlock Section

Negative Door Trigger Input

Green Wire

Function of the green wire as an open door input for negative switching door pins.

Positive Door Trigger Input

Violet Wire

Domelight Supervision Output WHITE/BLACK WIRE

3rd Channel Output

Negative Instant Trigger Input

Blue Wire

K9-5Classic Wiring Overview

Programming Features

Programming Transmitters