K II Enterprises PET-AGREE User Manual

The PET-AGREE is a hand held device to
assist in training and conditioning a pet dog or
cat. The PET-AGREE emits a harmless,
humane high frequency sound, clearly audible
to dogs and cats but barely perceptible to
humans. This sound helps emphasize verbal
commands to improve a pets response or can
be used as a stimulus alone to initiate a
conditioned response or interrupt improper
behavior. The PET-AGREE alone does not
induce proper behavior and the best results
occur when used in conjunction with proper,
proven, effective training techniques.
INSTRUCTIONS
1. Point the PET-AGREE toward the pet from a distance of about 5 feet
up to 20 feet away.
2. Press the button for 1 or 2 seconds while giving the desired verbal
command.
3. Repeat as necessary until the pet responds to your command as
desired.
USES
Training: The PET-AGREE can help emphasize verbal commands to
sit, heel, stay, come, quiet, stay down or any other trained response for
your pet. PET-AGREE may also be used as the signal for a trained
response such as calling back your dog from a long distance.
Behavior Modification: The PET-AGREE can reinforce corrective
commands to keep a pet off the furniture, stop jumping up on people,
stop excessive barking or caterwauling, stay out an area or stop
clawing, biting, scratching and chewing.
Protection: The PET-AGREE can also be used to keep stray or
unleashed dogs from approaching.
1. Point the PET-AGREE toward the aggressive, approaching animal
2. Press the button and activate PET-AGREE for 1 to 2 seconds
3. Repeat as necessary to repel or stop the animal
HELPFUL HINTS
- Always use positive reinforcement techniques when training with the
PET-AGREE.
- Best results are obtained when the PET-AGREE is pointed in the
direction of the pet being trained.
- Some pets respond instantly, while others may require more time. Be
consistent and repetitive.
- As a pet’s response to commands improves the PET-AGREE may be
required less frequently.
- Effectiveness may vary due to each pet’s age, temperament, and
hearing ability. Deaf pets will not respond.

K II Enterprises PET-AGREE Specifications

General

Brand	K II Enterprises
Model	PET-AGREE
Category	Pet Care Product
Language	English

Summary

PET-AGREE Device Overview and Usage

Operating Instructions

Point the device towards the pet from 5-20 feet, press the button for 1-2 seconds with command, and repeat as needed.

Key Applications

Used for training, behavior modification (e.g., stopping barking), and protection against stray animals.

Training and Behavior Tips

Use positive reinforcement, point towards the pet, be consistent, and understand effectiveness varies by pet.

Device Testing and Battery Replacement

Testing Functionality

The red LED indicates functionality. If it doesn't light, replace the 9 Volt Alkaline battery.

Battery Replacement Procedure

Remove bottom screws, detach old battery, insert new 9V Alkaline battery ensuring correct terminals.

Important Cautions and Warnings

Do not touch the silver disc. The device is for pet training only and not for humans or unintended use.

Product Warranty Information

Limited Warranty Coverage

K II Enterprises warrants against defects for 60 days from purchase in US/Canada. Battery damage excluded.

Warranty Void Conditions

Warranties are void if the product is damaged, adjusted, abused, modified, or tampered with.

Liability Limitations

Liability is limited to product price. No liability for damages arising from use or inability to use.

Warranty Claim Process

Return PET-AGREE with dated receipt to place of purchase or write to K II Enterprises for information.