Need help?Do you have a question about the K.M.E. SPA 240 S and is the answer not in the manual?
Details the volume controls, LEDs (Active, Limit, Protect, Indicator), and mode switches on the front panel.
Details ground disconnect switch, power cord input, speaker outputs, and audio inputs (XLR/jack).
Illustrates connection patterns for balanced and unbalanced audio signals.
Details power output, frequency response, distortion, noise ratio, and input specifications.
Guide for connecting speaker cabinets to channel A, B, or mono-bridge outputs.
Explains how to connect audio sources to channel A and B inputs via XLR or jack.
Details the use of the switch for selecting between Stereo, Mono, and Bridge modes.
Instructions for turning the amplifier on and adjusting volume levels for channels.
Explanation of POWER ON/PROTECT, INDICATOR, and LIMIT LEDs and their meanings.
Describes the function of the chassis ground disconnect switch for noise reduction.
Provides detailed power output, impulse power, and frequency range for both models.
Details distortion factor, signal-to-noise ratio, crosstalk, damping factor, and input impedance.
Lists front panel controls, indicators, and physical dimensions of the amplifiers.
To Next Page
General