INSTALLATION EQUIPMENT
1. Retractor inner casing
2. Retractor outer casing
3. Combination wrenches 32 mm, 14 mm, 8 mm
4. Allen keys 8 mm, 5 mm
5. Torque wrench
5a. open end fitting 19 mm
5b. hex bit socket 8 mm
6. Screwdriver
6a. Phillips head
6b. Flat head
7. Pliers
8. Thread seal tape
9. Pocket guide for insertion and retraction
10. Laminated instruction cards
11. Best Practices document
To Next Page
Loading...
