Need help?Do you have a question about the K-TRON KSU-II/KCM and is the answer not in the manual?
Provides details on user interface, calibration, general operation, and technical specs.
Explains symbols, parameter naming conventions, and key usage.
Defines acronyms and technical terms used throughout the manual.
Lists all menus and sub-menus for easy navigation within the programming.
Allows for easy product changeover and configuration of feeder parameters.
Guides through the process of feeder calibration for accurate measurements.
Allows setting alarm parameters and limits for system monitoring.
Programs tuning and control parameters for optimal feeder performance.
Facilitates easy setup and configuration of the feeder's refill function.
Programs scale parameters and SFT operation for accurate weighing.
Configures feeder-specific information and operational settings.
Programs digital and analog input/output functions for system integration.
Programs the vacuum loader function for material feeding.
Programs the Hurricane vacuum loader function.
Configures key communication functions for the KCM.
Sets access permissions for menus and parameters to control user access.
Guides on regular calibration and recording of tare and span values.
Covers setting max, min, and post-refill delay for feeder refill functions.
Explains the process and formulas for calibrating analog output signals.
Details steps for using an external motor drive instead of the internal KCM drive.
Lists system alarms, their causes, and recommended remedies.
Details specific LWF process alarms, their causes, and remedies.
Explains specific messages displayed on the feeder system.
Lists messages related to feeder startup issues and their solutions.
Addresses issues when the feeder fails to operate in gravimetric mode.
Discusses causes and solutions for massflow fluctuations in LWF feeding.
Details special features and functionalities of the KCM LWF system.
Provides a procedure for programming the KCM's internal loader function.
Lists and describes programming parameters for the HCU loader control.
Provides status codes for various drive types used with the KCM.
Step-by-step guide for downloading and installing language files to the KCM.
Lists service variables and their current values for technician reference.
Maps Process State Register (PSR) numbers to their descriptions for LWF.
Maps Alarm Status Register (ASR) numbers to their descriptions for LWF.
Comprehensive list of parameters organized by menu and variable.
General| Brand | K-TRON |
|---|---|
| Model | KSU-II/KCM |
| Category | Control Panel |
| Language | English |
To Next Page
