Dixell XR60CX Operating Manual
Thank you for your purchase.
This manual contains: set-up instructions, unit specs, safety information,
controller operation and maintenance steps.
K202, K204, K210, K220
IMPORTANT:
Your unit is preprogrammed
Place your unit in the desired location. Plug the unit in and allow it to cool and become stable for a minimum
of 24 hours before logging temperature or stocking products.
Be careful when setting or changing temperatures
WARNING: Changing some controller parameters can damage your unit and/or result in a loss of product. K2
will not be held responsible for losses due to unauthorized parameter changes.
Changing advanced parameters may damage the unit or void your warranty.
Please contact K2 before attempting to change advanced parameters.
Unfamiliar with the operation of a K2 controller?
Use the video tutorials on our website resources page or call us for assistance with special parameters.
Some K2 units can be changed from Celsius to Fahrenheit. We do not recommend changing your
unit to Fahrenheit. Your controller has operational parameters that rely on data in Celsius to
maintain proper function.
3.3.2022
To Next Page
Need help?
General