The Kaabo Skywalker is a series of electric scooters designed for personal transportation, offering a range of models with varying specifications to suit different user needs and local regulations. This user manual provides detailed information on the product, safety instructions, operation, maintenance, and troubleshooting.
Function Description:
The Kaabo Skywalker is an electric scooter designed for urban commuting and recreational use. It features a foldable design for easy storage and portability, a powerful motor for efficient travel, and various safety features to ensure a secure riding experience. The scooter is equipped with a display that shows essential information such as speed, battery level, and driving mode. Users can switch between different speed levels (L1, L2, L3) and driving modes (ECO/TURBO, SINGLE/DUAL motor drive) to optimize performance and range. The "Non-Zero Start" setting (Kick-And-Go) requires the scooter to be in motion before the accelerator engages, enhancing safety.
Important Technical Specifications:
The Skywalker series includes several models: Skywalker 8, 8H, 8S, 10, 10H, 10S, and 10S+. Each model offers different configurations in terms of voltage, battery capacity, range, speed, motor power, and braking systems.
Skywalker 8:
- Configuration: 36V 10.4AH, 36V 21AH, 48V 13AH
- Max. Range: 28-32 km (36V 10.4AH), 65-70 km (36V 21AH), 45-50 km (48V 13AH)
- Max. Speed: 38 km/h
- Charging Time: 3-5 h (36V 10.4AH), 6-8 h (36V 21AH), 4-6 h (48V 13AH)
- Motor: 350 W (36V), 500 W (48V)
- N.W: 16 kg (36V 10.4AH), 18 kg (36V 21AH), 19.3 kg (48V 13AH)
- Brake: Rear Drum Brake + Electronic Brake
- Shock Absorber: Front Shock Absorber
- Tire: 8.0 x 2.0 Tires
- Open Size: 1050 x 560 x 1150 mm
- Folding Size: 1100 x 190 x 320 mm
Skywalker 8H:
- Configuration: 36V 10.4AH, 36V 21AH, 48V 13AH
- Max. Range: 28-32 km (36V 10.4AH), 65-70 km (36V 21AH), 45-50 km (48V 13AH)
- Max. Speed: 35 km/h (36V), 38 km/h (48V)
- Charging Time: 3-5 h (36V 10.4AH), 6-8 h (36V 21AH), 4-6 h (48V 13AH)
- Motor: 350W (36V), 500W (48V)
- N.W: 17.3 kg (36V 10.4AH), 19.4 kg (36V 21AH), 18.6 kg (48V 13AH)
- Brake: Rear Drum Brake + Electronic Brake
- Shock Absorber: Front and Rear Shock Absorber
- Tire: 8.0 x 2.0 Tires
- Open Size: 1070 x 560 x 1150 mm
- Folding Size: 1060 x 190 x 320 mm
Skywalker 8S:
- Configuration: 48V 13AH
- Max. Range: 40-45 km
- Max. Speed: 40 km/h
- Charging Time: 4-6 h
- Motor: 800 W
- N.W: 22 kg
- Brake: Rear Disc Brake + EABS Electronic Brake
- Shock Absorber: C Shock Absorption
- Tire: 85mm Solid Tire
- Open Size: 1100 x (520~560) x 1150 mm
- Folding Size: 1080 x 190 x 350 mm
Skywalker 10:
- Configuration: 36V 10.4AH, 36V 21AH, 48V 15.6AH
- Max. Range: 28-32 km (36V 10.4AH), 65-70 km (36V 21AH), 50-55 km (48V 15.6AH)
- Max. Speed: 38 km/h (36V), 42 km/h (48V)
- Charging Time: 3-5 h (36V 10.4AH), 6-8 h (36V 21AH), 4-6 h (48V 15.6AH)
- Motor: 400 W (36V), 500 W (48V)
- N.W: 17.3 kg (36V 10.4AH), 19.3 kg (36V 21AH), 18.6 kg (48V 15.6AH)
- Brake: Front and Rear Disc Brake + Electronic Brake
- Shock Absorber: No
- Tire: 10.0 x 2.25 / 10.0 x 2.5 tires
- Open Size: 1135 x 560 x 1200 mm
- Folding Size: 1120 x 240 x 360 mm
Skywalker 10H:
- Configuration: 36V 10.4AH, 36V 21AH, 48V 15.6AH
- Max. Range: 28-32 km (36V 10.4AH), 65-70 km (36V 21AH), 50-55 km (48V 15.6AH)
- Max. Speed: 38 km/h (36V), 42 km/h (48V)
- Charging Time: 3-5 h (36V 10.4AH), 6-8 h (36V 21AH), 4-6 h (48V 15.6AH)
- Motor: 400 W (36V), 800 W (48V)
- N.W: 19.6 kg (36V 10.4AH), 21.7 kg (36V 21AH), 21.4 kg (48V 15.6AH)
- Brake: Front and Rear Disc Brake + Electronic Brake
- Shock Absorber: Front and Rear Shock Absorber
- Tire: 10.0 x 2.25 / 10.0 x 2.5 tires
- Open Size: 1186 x 560 x 1200 mm
- Folding Size: 1170 x 240 x 360 mm
Skywalker 10S:
- Configuration: 48V 23.4AH, 60V 23.4AH
- Max. Range: 80 km (48V), 90 km (60V)
- Max. Speed: 50 km/h (48V), 60 km/h (60V)
- Charging Time: 12 h (2A charging) / 6 h (4A charging)
- Motor: 800 W (48V), 1200 W (60V)
- N.W: 23.5 kg (48V), 25 kg (60V)
- Brake: Front and Rear Disc Brake + Electronic Brake
- Shock Absorber: Front Type C Shock Absorber, Rear Common Shock Absorber
- Tire: 10.0 x 2.25 / 10.0 x 2.5 tires
- Open Size: 1208 x 560 x 1200 mm
- Folding Size: 1220 x 230 x 380 mm
Skywalker 10S+:
- Configuration: 48V 23.4AH, 60V 23.4AH
- Max. Range: 80 km (48V), 120 km (60V)
- Max. Speed: 60 km/h
- Charging Time: 12 h (2A charging) / 6 h (4A charging)
- Motor: 800 W x 2 (48V), 1000 W x 2 (60V)
- N.W: 29 kg (48V), 30.5 kg (60V)
- Brake: Front and Rear Disc Brake + Electronic Brake
- Shock Absorber: Front Type C Shock Absorber, Rear Common Shock Absorber
- Tire: 10.0 x 2.25 / 10.0 x 2.5 tires
- Open Size: 1208 x 560 x 1200 mm
- Folding Size: 1220 x 230 x 380 mm
Note: Specifications may vary to meet local requirements and laws. Range can be affected by loaded weight, wind direction/speed, riding surface density, slope, and tire condition.
Usage Features:
- Folding and Unfolding:
- Unfolding: Kick down the folding lever, put the safety pin to the right position to lock it. Pull the T-tubes to the left and right sides. Adjust the height by opening the locking nut and moving the main tube up or down, then lock the nut.
- Folding: Switch off the scooter. Pull the T-tubes to the left and right sides respectively. Fold the handles. Open the locking nut. Withdraw the extension. Unlock the protection pin, kick down the folding lever, and push the handlebar forward to fold the scooter. Always keep the protection pin in position when the scooter is unfolded.
- Display and Key Settings:
- Driving Mode Selection: Two switches on the right side of the handlebar configure driving modes. The ECO/TURBO switch regulates power (ECO for reduced torque/speed, TURBO for full power). The SINGLE/DUAL switch toggles between single (rear) and dual motor drive.
- Display Settings: The display shows speedometer, battery indicator, and gear.
- P-Settings: Advanced settings can be accessed by pressing POWER and MODE simultaneously for 2 seconds. These settings include tire diameter, controller shut-down voltage, motor magnetic pole setting, speed signal selection, distance/speed unit, start setting (Kick-and-Go or immediate start), cruise control, initial acceleration, electric (regenerative) braking, speed limit, clear total distance, auto-turn off time, and display brightness.
- Basic Operation:
- Power Switch: Press for 3 seconds to turn on/off. Automatic power-off after 90 seconds of inactivity.
- Speed Control: Press the power switch, then the MODE button to cycle through speed levels (L1, L2, L3).
- Power Indicator: Small rectangles indicate battery power.
- First Ride: Choose a flat, non-slippery outdoor area. Adjust the T-tube height. Press the power switch. Place one foot on the pedal and push off with the other foot to start. Gently pull the accelerator and lean forward. Once moving, place both feet on the pedal.
- Parking: Gradually apply brakes to slow down and cut power. Avoid sudden hard braking.
- Safety Instructions:
- Do not drive in rainy days.
- Do not attempt self-repair to avoid electric shocks.
- Abide by local road traffic laws.
- No acrobatics.
- One person per scooter.
- Wear protective equipment (helmet, gloves, elbow, knee pads).
- Practice in open areas before riding on roads.
- Adjust T-tube to a suitable height.
- Charge for six hours before the first ride.
- Do not cut off power while running.
- Avoid climbing steps higher than 3cm.
- Operating temperature range: -5℃ to 50°C.
- Charge monthly if unused for long periods.
- Avoid puddles deeper than 5cm or direct water spray.
- Keep feet on the pedal when the scooter is running.
- Do not exceed maximum local speed requirements.
- Ensure the folding lock is engaged before driving.
Maintenance Features:
- Scooter T-tubes: Re-lubricate once every six months. Do not use WD-40.
- Tire: Skywalker 10S models use pneumatic tires.
- Brake: Adjust the regulator (nut) in the rear wheel if braking performance degrades.
- Battery: Lithium battery is rechargeable up to 1000 times. Replace when range shortens sharply. Charge when the battery meter flickers or shows one bar. Charge monthly if unused for long periods. Use only specialized Kaabo chargers.
- Charging: Insert charging plug into the scooter's charge hole first, then plug into AC supply. Red indicator light means charging; green means fully charged. Unplug after full charge.
- Troubleshooting (Checking List): If the scooter is not working normally, check:
- If power is on.
- If there is sufficient electricity.
- If the brake is unstuck.
- If all hubs and connectors are clean and accurately linked.
- If issues persist, consult involved personnel.
Need help?
General
To Next Page