FOLDING & UNFOLDING
Unfolding Folding
Step 1
Lift up front fork (please adjust the
position of locking shaft if needed)
Step 2
Put down the folding lever. And
make sure the locking shaft is well
positioned like the photo above:
Step 3
Adjust the position of the protection
nut
Step 4
Insert the protection pin to complete
the unfolding.
Step 1
Take out protection pin by pushing
the head of the pin and start to
fold.
Step 2
Adjust the position of the protection
nut
Step 3
Pull up the folding lever to fold the
scooter. The locking shaft will move
like the photo above:
Step 4
Lay down the front fork to complete
the folding.
Very important: please make sure the locking shaft is LOCKED
securely!