EasyManua.ls Logo

KAASPEED K1 - Driving Precautions; Pre-Driving Inspection Checklist; Braking Techniques and Safety

KAASPEED K1
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Driving Precautions
Check item Focus
Handlebar
1Securely mounted
1Normal pressure
2Proper tread depth,Tires not worn out
3No cracks or cut
Enough power to drive a planned distance
Daytime running light and tail light on after start-up
Test to make sure brakes function properly
2Flexible rotation (But do not turn over 90°)
3No steering slip
Brake
Tires
Electricity
Lighting
Pre-driving inspection
Braking Use
Check before riding your scooter. Don’t ignore the importance of inspections.
1Before braking, keep your body upright.
2Tires may be locked and lose turning capability if too much force is applied to the brakes. In this case,
release the brake handle to unlock the tires.
3Apply front and rear brakes evenly as much as possible.
4The products have a certain degree of water resistance, but not completely water proof.
Do not let water go beyond the bottom of battery compartment.
Notice: Using only one brake will cause excessive brake pad wear and increase braking distance.
Warning: It is dangerous to use only the front or rear brake which may cause skidding or loss of control. Especially on slippery or curved roads,
you must slow down and use brake properly.
8