4 k4evo707en-2012-07
4 Online operation with firmware option Access Manager ..................... 27
4.1 Topology .....................................................................................................27
4.2 Functions with firmware option Access Manager .......................................28
4.2.1 Putting the standalone access control into operation (without host system)29
4.2.2 Electric strike operating mode ....................................................................30
4.2.3 System requirements .................................................................................30
4.3 MIFARE/LEGIC module .............................................................................31
4.3.1 Supported RFID technologies with possible media applications ...............31
4.4 Configuration with firmware option Access Manager .................................32
4.4.1 Changing the settings .................................................................................32
4.4.2 Overview of DIP switches ...........................................................................32
4.4.3 RS-485 interface ........................................................................................33
4.4.4 Addressing the Compact Reader ...............................................................33
4.4.5 Inputs IN1 and IN2 .....................................................................................34
4.5 Factory reset or firmware update with DIP switch 6 ...................................34
4.6 Antenna adaptation ....................................................................................35
4.7 LED display ................................................................................................35
4.8 Putting into operation using the checklist ...................................................36
4.8.1 Mounting and connection ...........................................................................36
4.8.2 Configuring .................................................................................................36
4.8.3 Parameterizing (online) ..............................................................................36
4.8.4 Putting the Compact Reader into operation ...............................................36
4.9 Maintenance ...............................................................................................37
4.9.1 Restart ........................................................................................................37
4.9.2 Factory reset ...............................................................................................37
4.9.3 Firmware / LEGIC OS update ....................................................................38
4.9.4 Cross upgrade ............................................................................................40
5 Online operation with firmware option cDML ........................................ 41
5.1 Topology .....................................................................................................41
5.2 Functionalities with firmware option cDML .................................................42
5.2.1 Electric strike operating mode ....................................................................43
5.2.2 System requirements .................................................................................43
5.3 LEGIC module ............................................................................................44
5.3.1 Supported RFID technologies with possible media applications ...............44
5.4 Configuration with firmware option cDML ..................................................45
5.4.1 Changing the settings .................................................................................45
5.4.2 Overview of DIP switches ...........................................................................45
5.4.3 RS-485 interface ........................................................................................46
5.4.4 Addressing the Compact Reader ...............................................................46
5.4.5 Inputs IN1 and IN2 .....................................................................................47
5.5 Factory reset or firmware update with DIP switch 6 ...................................47
5.6 Antenna adaptation ....................................................................................48
5.7 LED display ................................................................................................48
5.8 Putting into operation using the checklist ...................................................49
5.8.1 Mounting and connection ...........................................................................49
5.8.2 Configuring .................................................................................................49
5.8.3 Parameterizing (online) ..............................................................................49
5.8.4 Putting the Compact Reader into operation ...............................................49
5.9 Maintenance ...............................................................................................50
5.9.1 Restart ........................................................................................................50
5.9.2 Factory reset ...............................................................................................50
5.9.3 Firmware update ........................................................................................51
To Next Page
Loading...
Need help?
General
