Kaba MIFARE - Page 5

k4evo707en-2012-07 5
5.9.4 Cross upgrade ............................................................................................ 52
6 Online operation with firmware option Subterminal ............................. 53
6.1 Topology ..................................................................................................... 53
6.2 Functionalities with firmware option Subterminal ....................................... 53
6.2.1 System requirements ................................................................................. 53
6.3 MIFARE/LEGIC module ............................................................................. 54
6.3.1 Supported RFID technologies with possible media applications ............... 54
6.4 Configuration with firmware option Subterminal ........................................ 55
6.4.1 Changing the settings ................................................................................ 55
6.4.2 Overview of DIP switches .......................................................................... 56
6.4.3 Addressing the Compact Reader ............................................................... 56
6.4.4 Connection and configuration .................................................................... 57
6.5 Putting into operation ................................................................................. 57
6.6 LED display ................................................................................................ 58
6.7 Maintenance ............................................................................................... 58
6.7.1 Cold start .................................................................................................... 58
6.7.2 Firmware / LEGIC OS update .................................................................... 59
6.7.3 Cross upgrade ............................................................................................ 60
7 Standalone operation with firmware option E300 V4 ............................ 61
7.1 Topology ..................................................................................................... 61
7.2 Functionalities with firmware option E300 V4 ............................................ 62
7.2.1 Operation as validation actuator ................................................................ 63
7.2.2 Electric strike operating mode .................................................................... 63
7.3 MIFARE/LEGIC module ............................................................................. 65
7.3.1 Supported RFID technologies with possible media applications ............... 65
7.4 Configuration with firmware option E300 V4 .............................................. 66
7.4.1 Changing the settings ................................................................................ 66
7.4.2 Overview of DIP switches .......................................................................... 66
7.4.3 Choosing the mode .................................................................................... 67
7.4.4 Input IN1 (s-module)................................................................................... 68
7.4.5 Output OUT ................................................................................................ 68
7.4.6 Electric strike connection ........................................................................... 68
7.5 INI reset or firmware update with DIP switch 6 .......................................... 69
7.6 Antenna adaptation .................................................................................... 69
7.7 LED display ................................................................................................ 69
7.8 Putting into operation using the checklist ................................................... 70
7.8.1 Mounting and connection ........................................................................... 70
7.8.2 Configuring ................................................................................................. 70
7.8.3 Putting the Compact Reader (control unit) into operation .......................... 70
7.9 Maintenance ............................................................................................... 71
7.9.1 Restart ........................................................................................................ 71
7.9.2 INI reset ...................................................................................................... 71
7.9.3 Firmware / LEGIC OS update .................................................................... 73
7.9.4 Setting/refreshing the configuration ........................................................... 75
7.9.5 Crossgrade ................................................................................................. 75