Need help?Do you have a question about the Kaden KJR-120N and is the answer not in the manual?
Guidance on choosing a suitable installation location.
List of required parts and assemblies for installation.
Important safety and handling guidelines for installation.
Physical dimensions of the wired controller unit.
Diagram illustrating the basic wiring connections.
Detailed figure showing the wiring connections to the indoor unit.
Steps to detach the upper part of the wired controller.
Instructions for fastening the controller's back plate.
Guide for correctly installing the backup battery.
General instructions and cautions for wiring the controller.
Specific guidance on installing and sealing shielded wires.
How to reassemble the controller after wiring is complete.
Highlights the main characteristics of the wired controller.
Lists the various capabilities and modes of the controller.
Instructions for setting the controller's clock and date.
How to turn the air conditioning unit on and off.
Guide to selecting modes like Cool, Dry, Heat, or Fan.
How to set the desired room temperature.
Instructions for selecting the fan speed.
Choosing between indoor unit or controller for temperature detection.
How to enable rapid cooling or heating mode.
Steps to activate and deactivate the button lock feature.
Instructions for operating the air direction swing feature.
Setting operating times for each day of the week.
Setting the unit to start operation at a specific time.
Setting the unit to stop operation at a specific time.
Setting both start and stop times for operation.
Initial steps for configuring the weekly timer.
Selecting the specific day for timer programming.
Setting the start time for a weekly timer event.
Setting the stop time for a weekly timer event.
Activating and deactivating the weekly timer function.
Programming days to skip timer settings for holidays.
Setting a delay for the operation start or stop.
Duplicating timer settings from one day to another.
Starting the configuration process for weekly timer 2.
Choosing the specific day for timer 2 programming.
Setting the start time for a weekly timer 2 event.
Specifying the exact time for a timer event.
Adjusting fan speed within the timer settings.
Programming holiday exceptions for timer 2.
Activating and deactivating the weekly timer 2 function.
Replicating timer 2 settings across different days.
Removing specific timer events from the schedule.
General| Brand | Kaden |
|---|---|
| Model | KJR-120N |
| Category | Controller |
| Language | English |
To Next Page