Kado - Lussi Freestanding Bath
of 02
Plumbers, please ensure a copy of the installation
instruction is left with the end user for future reference.
We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions
Published 19/01/2024
Page 02
Care and Maintenance:
Ÿ Repairing a Scratch: With the Bath in a dry condition, first use the hand sander block and sandpaper
provided (320-400 grit).
Ÿ Apply the paste to the bath and then in a circular motion start sanding process.
Ÿ To finish, use finer grit sandpaper (1500-2000 grit).
Ÿ Finish off any excess with cotton cloth.
Everyday cleaning
Ÿ For general cleaning use soapy water or an approved cleaner for solid surfaces.
Ÿ For a deeper periodic clean, to maintain the matte surface use the Kado Solid Surface Care
Maintenance Kit supplied with this bath.
Ÿ When dust and dirt appears on the surface that general cleaning does not fully remove, the solid
surface Cleaning and Maintenance paste can be used.
Ÿ Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty
Conditions.
To Previous Page
Loading...