Page 01
add cartridge housing
1
MIZU Silk Wall Basin Mixer / Mizu Silk Wall Bath Mixer UIB
98°
98°
184 19
117
114
ASM X0
2
Designer
Proofread
Verify
Authorized
Page 1;Total Pages 1
Description
Item Code
Material
Edition
Theory Weight[g]
Theory Area[cm ]
Theory External Area[cm ]
Drawing Unit mm
Scale 1:2
Marking
Revised Content Design Date
Basin Mixer
133932504RECE-ABC
FHB 18.09.03
LLJ 18.09.03
T F 18.09.03
PBY 18.09.03
Drawing Angle
Useful Measurement
Key Measurement
Measurement Tolerance Value (Not Marked)
Angle Tolerance Value (Not Marked)
Basic Measurement
0＜a≤6 6＜a≤30 30＜a≤120 120＜a≤400
`0.5 ~
Tolerance Value
`0.1 `0.2 `0.3 `0.5
This product must be fitted to a solid wall or suitably reinforced wall framing structure in order to meet 1100N force requirement of AS 1428.1.
• Fixings provided are for use with solid walls only. It is the installers responsibility to ensure correct fixings are used with any other wall type
• Clean with mild detergent or clear liquid cleansers. Wipe dry with a clean soft cloth
• Do not use steel wool or any abrasive cleansers
• Avoid prolonged exposure to any chemical solution containing chlorides or acids. Surface damage caused by acids will void warranty
Important:
Ÿ Please unwrap the bath and check it carefully to ensure it has not been damaged in handling or
transport.
Ÿ Please check that all parts have been supplied.
Ÿ Assemble bath on a mat to protect against damage to bath surface.
Ÿ Any installation should be carried out by a qualified tradesman with knowledge of statutory plumbing
requirements in your area.
Ÿ This installation guide does not include details of waste connection; final decision about installation of
waste connection & cutout allowance in floor for connection, should be taken by a suitably qualified
person.
*
*
Ÿ Apply silicone sealant to where bath meets wall
and floor surfaces.
Installation
Freestanding
Freestanding
Freestanding Back to Wall
1
Silicone
Kado - Lussi Freestanding Bath
of 02
To Next Page
Need help?
General