EasyManua.ls Logo

Kaer Electric KT2000 - Function Operations

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
In input state, press the key to enter the switch between input
methods.
·* key:
In input state, press the key to input the special symbol.
·Send key:
Dialed out the numbers, press the key to make a call.
In on-hook state, press the key to review the dialed number, press
again, can dial out the number.
·Up/Down key:
In menu state, press the key to browse page;
In edit and browse state, press the key to move the cursor to
change lines;
In on-hook state, press the key to adjust the volume.
.Left/Right key:
In standby state, press [left] to quickly edit the message, press
[right] to quickly read the received message;
In edit and browse state, press the key to move the cursor.
·Redial: press the key to dial the last dialed number.
·HF: No need to pick up the handset to dial, press the key to have
hands free function.
·KF:To set the quick dialed number.
7 Function Operations
7.1 Make a call
1) In standby state, press the numerical key to dial out;
2) Pick up the handset or press[HF] to get dial tone, then press
13
the numerical key;
3) After dialed the phone number, the LCD screen will display
the dialed number, press [delete] to erase wrong inputted
number if needed;
4) After finished inputting the number, press[send] or wait for a
moment to dial out the number(setup option for call delay
can be modified);
5) Once getting through the line, the LCD screen will display the
talking time;
6) Dial out from the phonebook:
Press [UP] or [DOWN] to check the phone numbers and names to
select the wanted number and press [send] to dial out.
7.2 Receiving a call
When incoming call is coming, pick up handset or press [HF] to
receive the call.
7.3 Ending a call
Pick up the handset to get a call, hang up to end the call.
Hand free phone; press [HF] to end the call.
Press [on/off] to end the call.
7.4 Reject the incoming call
When the incoming call is coming, you can press [delete] or [on/off]
to reject the incoming call.
7.5 Redial
In standby state, press [redial] to redial the last dialed number.
7.6 Dialed calling
In standby state, you can press [send] to review the dialed number.
7.7 Hands free