2.1 Open the folding buckle of the riser. After the riser is aligned with the slot of the
riser, lock the quick disassembly rod (note: it must be completed in the folded state).
into the clamping slot of the folding handle.
2.2 Raise the riser to lock the folding handle and then fasten the protective sleeve
3. The red light means the battery is charging, and the green light means thebattery
is fully charged (wait for 30 minutes after the green light of the charger is displayed
before unplugging it).Charging time depends on the battery capacity, the general
charging time is 4-6 hours.
4.
W
ar
n
i
n
g
:
Do not charge for more than 10 hours. Keep away from high temperature
environment and store in a cool place.
6 . Installation instructions
1.
2. :
2.1 2.1 2.1 2.2 2.2
3.
Headlight& fenders installation:
3.1 Loosen the headlight screw from the front fork;Install the headlight into the
screw hole of the front fork and tighten the screw with the hexagon tool.
-4-
wrapping rope with tools.
Open the carton of the electric bicycle, take out the electric bicycle, and cut off the
To Next Page
Loading...