KAISDA K6 - Meter Operation

3. Meter operation
3.1 Meter instruction
3.2 Meter operation
3.2.1 3.2.2 3.2.3 3.2.4 3.2.
3.2.1: Hold the button for 2s to switch on/off the E-Bike system. The default
value is “low” pedal assist level. Full Electric Function (Pure electric mode)
3.2.2: Press “+” to crease into pedal assist level “Mid”. Full Electric Function
(Pure electric mode).
3.2.3: Press “+” again to move into pedal assist level “High”. “High” is
the maximum power of PAS. Full Electric Function (Pure electric mode)
3.2.4: Foot riding (without pedal assistant and electric
）
3.2.5: Press the "+" button for 2 seconds during power-on state, the system
Operating instructions
-2-