Need help?Do you have a question about the Kaiser-Frazer Henry J and is the answer not in the manual?
General| Brand | Kaiser-Frazer |
|---|---|
| Model | Henry J |
| Category | Automobile |
| Language | English |
Procedure to test cylinder compression at normal operating temperature using standard equipment.
Adjust tappet clearance for intake and exhaust valves to specified cold settings.
Check battery, terminals, clean corrosion, and tighten cables securely.
Inspect, clean, and reset spark plug electrode gaps before installation.
Clean coil, check cables, terminals, and test for internal trouble.
Service distributor cap, wiring, rotor, points, and perform performance tests.
Check fuel pump operation via pressure and vacuum tests; clean strainer.
Clean carburetor, adjust idle speed to 550 RPM and set idle mixture.
Check combustion efficiency using an analyzer for proper air-fuel ratio.
To Next Page