The Sensedge Mini is a commercial-grade air quality monitor. This user manual will
provide a basic guide to its first use. Further information can be found on the Kaiterra
Support Portal at http://support.kaiterra.com/sensedge-mini
Externals and Air Flow
Air is drawn into the Sensedge Mini from the lower side, as well as the air intake on the
upper side. It is vital that neither side of the device is covered. Any changes in airflow
may affect the readings and accuracy.
Power and Connectivity
The Sensedge Mini provides multiple power and connectivity options:
Power:
USB-C: Only use the cable and charger/adapter supplied with the device
DC direct wiring: Used for power supply of 12V, 1000mA
PoE (Power over Ethernet): Available for model SE000200P
Connectivity:
2.4GHz Wi-Fi (802.11 b/g/n)
Ethernet: Used for data transfer via Ethernet
RS-485: Used for Modbus communication
To Next Page
Loading...
