Kaiterra Sensedge Deployment Guide

Page 2
1.
Introduction
Kaiterra enterprise air quality monitors are designed to be intuitive solutions for your
continuous air quality monitoring needs.
These monitors can be used in the following cases:
 To gain a better understanding of the air quality in your building
 To ensure optimized air quality and occupant comfort
 To address concerns of occupants and tenants
 To analyze how cleaning chemicals impact air quality
 To troubleshoot pollution hot spots and identify under-utilized areas
 To evaluate the performance of the filtration and HVAC systems
This guide will assist you in determining the best place to install your Kaiterra Sensedge air
quality monitors for individual rooms, large open spaces, and entire building projects.
This guide will also cover power considerations, network considerations, and device
configuration so you are best prepared to handle your upcoming installation project.

Kaiterra Sensedge Specifications

General

TVOC Measurement Range	0 to 60000 ppb
Measurement Parameters	PM2.5, PM10, CO2, TVOC, NO2, O3, Temperature, Humidity
Connectivity	Wi-Fi, Ethernet
Operating Temperature	0°C to 50°C
Operating Humidity	0% to 95% RH (non-condensing)
PM2.5 Measurement Range	0 to 1000 µg/m³
PM10 Measurement Range	0 to 1000 µg/m³
Humidity Measurement Range	0 to 95% RH